Data Recovery : Raid Data Recovery
Raid data recovery is somehow different from all other types of data recovery. Most experts advise not to try to recover the data yourself before sending in the hard drives to a data recovery company. This is because most companies found that most of the times simple users try to recover the files all by themselves, they fail and not only. Their actions will make the recovery process even harder and if the lost information is important, someone will be in big trouble. If it’s about raid data recovery better handle it quick to the professionals without touching anything.
RAID achieves all these aims via several configurations. The most common nowadays are RAID 0, RAID 1, RAID 0 1/ RAID 10 and RAID 5. Each of these RAID types has their own method of redundancy.
There are procedures that data recovery companies always follow when they have a recovery on the line. These procedures are followed exactly and even expand when it comes to raid data recovery. As a first step in any raid data recovery, experts have to make sure that all drives are working. For Raid 0 as an example, it is a must for all the drives to be 100% functional. When they are not functional, the drives will be taken in the clean room and will be repaired.
When all the drives will function normally, clones of all the drives will be made. During this process, your drive will be placed in a write protect mode to make sure the data will not be altered in any way. The normal recovery process will be performed on the cloned drives, again, for increased safety.
When researching for a data recovery company you will notice some of them will offer a service full guarantee, if they don’t get your data back, you don’t pay. A phone consultation is something that could help you also. They will also offer you absolute 100% confidentiality on your data.
The procedures that Raid data recovery consists of start by making sure all of the drives are properly functioning. This may mean taking the physically damaged drives into the clean room and try to make all the necessary repairs, in order for them to normally function again. The hard disk data recovery technician then initiates a very low-level process that allows him to work around bad sectors of the disk. It is in fact making complete sector-by-sector clones of every drive. The original source drive is being put in a “write protect” mode, in order to protect the existing data during the cloning process. The actual recovery process is performed on these cloned copies!
Filed under: Data Recovery