Concrete Color Pigment That You Can Use
Although there are a lot of available natural materials like woods and metals, ready made concrete mixture is also readily available. However, this material still needs to be stained or coated. There are many methods to give life and color to this mixture.
The mixing process increases the number of strategies in coloring a concrete. Concrete color pigment is available in a form of liquid, powder or granule. Powdered pigments are placed in a disintegrating bag that will dissolve when it will be added to the mixture. It will greatly help in reducing the tendency of inhaling the powder.
The most popularly used color is the black. It can be used to create any shade of gray, either light or dark. It is widely used in many driveways, runways, roadways and parking lots, for it covers the stains from the oil produced by the vehicles that are passing through. It will absorb heat and reduce ice occurrence.
Black pigment comes in two types, the carbon and the iron oxide. The carbon will give a darker black, while the iron oxide will give a gray color. Meanwhile, carbon will easily wear out over time than an iron oxide.
They also come in a liquid form. It is either a natural or synthetic form and it is usually measured in volume, similar to the measuring process of a paint. It will be put together with the material during the mixing process. The downside of a natural one is that it only offers earth tones. Synthetic on the other hand, offers almost all shades that you might know.
Using a liquid on can sometimes give you an undesirable uneven shade. That is why it better to avoid using a liquid form, for it can give you an unpleasant result sometimes. It you wish to use it, you can mix it with aggregates and a water containing salts for best results. It will give a efflorescence result which may look white and powdery.
In general, a granulated form is used together with a dry to wet system of metering that will provide a cost effective strategy to create a liquid form. Concrete businesses usually can purchase granulated one and they will mix it with water. It will be placed in a tank and eventually it will be dispensed straight into the mixing truck. You can save a lot of its shipping costs one, for it weighs less than the liquid.
There are also techniques that you need to know. Staining is one, it can be done after the mixture has set and cured. The rubbed stain is a technique that refers to the rubbing of fine powdered color into the texture. After obtaining the right shade, you will going to apply a topical sealer to bond the colouring on the surface. The resist technique, on the other hand, is the mixing of hue with some sealant and brushing it. These two techniques will need to have a topical solution to be applied again over time.
A technique called color wash is a strategy similar to painting. You will mix a coloring paint in a water based. If you have achieved your desired shade. Brush it with a sealant. And put a final coat of sealant after the first coat had dried to attain the one you desired.
Filed under: Marketing