{"id":10433,"date":"2014-06-20T03:49:25","date_gmt":"2014-06-20T08:49:25","guid":{"rendered":"http:\/\/magic1host.com\/blog\/?p=10433"},"modified":"2014-06-20T03:49:25","modified_gmt":"2014-06-20T08:49:25","slug":"ways-of-improving-stainless-steel-welding","status":"publish","type":"post","link":"https:\/\/magic1host.com\/blog\/?p=10433","title":{"rendered":"Ways Of Improving Stainless Steel Welding"},"content":{"rendered":"
by Sherry Gross<\/div>\n

There are three classes of metals based in stainless steel; Austenitic, martensitic and ferritic. Classification is based on their crystal structure. Stainless steel has a chromium content of at least ten percent. Austenitic grades are available with lowered carbon content. The basic steps below act as a guide in stainless steel welding<\/A>.<\/p>\n

Ensure safety as an initial step. Always take precaution of others and yourself since gases and fumes generally affect health while electrocution can also be hazardous. Take note of the instructions provided by the manufacturer and provide the staff with safety gadgets. Make sure that ventilation is ensured by keeping exhaust at arc, put on protective gear for body, ears and eyes. Be alert not to come in contact with naked electrical wires.<\/p>\n

Decide on which joint design you will use. This will ensures strength of welded steel. When connecting base metals, ensure strength, metal thickness, bonding position and how accessible the joints are. Joints are of five types; lap joint, edge joint, butt joint, cornet joint and t joint. They are arranged in different combinations to ensure a variety of welds. Make use of fixtures and jigs to secure pieces. When you are connecting, clamp metal sheet, joints and fillets when working.<\/p>\n

Choose a welding process. For the stick electrode process, heat needed for welding is from the electric arc that is flanked by the metal at the base and the metal electrode. It is a cheaper process but it is inefficient because of the slang coating or stub loss. Tig welding process can be performed on various metals. Heat used in the welding process is generated at an electric arc between base meal and the tungsten electrode. Filler metal can be added if necessary. An inert gas shields the arc.<\/p>\n

Welding of mig is faster on thin metal gauge and weighty plates. The process is provided with heat by the arc sandwiched by filler electrode and base metal. The gas doses the shielding. Mig welding come in two types; spray transfer and short circuit transfer. The short circuit is used in tiny gauges and produces shallow weld. The method of spray transfer continuously sprays metal droplets is undertaken to transfer the metal to the arc.<\/p>\n

If the method you have chosen requires a shielding gas, determine the best gas to use. No shielding gas is required in stick electrode method. In tig process, use argon for thicknesses approximated to be half. On thicker sections, use a mixture of argon and helium or helium alone. For deeper penetration, employ helium.<\/p>\n

Next, select filler metal. If metal pieces are same, make use of a filler metal with the same composition as the base metals for uniform properties of the weld. Consider the mechanical characteristics, the possibility of cracking and the compatibility when you choose a filler metal having different applications of base metal.<\/p>\n

Use either direct or alternating current when using the stick electrode method. Direct current takes one direction of flow in the circuit. It either uses straight polarity or reverse polarity. Its advantage is that it can work even in settings with low current. Use direct current having a straight polarity in Tig bonding.<\/p>\n

\n
About the Author:<\/div>\n
You can visit scorpionprocess.com<\/a> for more helpful information about Ways Of Improving Stainless Steel Welding.<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

There are three classes of metals based in stainless steel; Austenitic, martensitic and ferritic. Classification is based on their crystal structure. Stainless steel has a chromium content of at least ten percent. Austenitic grades are available with lowered carbon content. The basic steps below act as a guide in stainless steel welding<\/A>.<\/p>\n","protected":false},"author":4638,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[10],"tags":[83],"class_list":["post-10433","post","type-post","status-publish","format-standard","hentry","category-customer-service","tag-customer-service"],"_links":{"self":[{"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/10433","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/4638"}],"replies":[{"embeddable":true,"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=10433"}],"version-history":[{"count":0,"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/10433\/revisions"}],"wp:attachment":[{"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=10433"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=10433"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/magic1host.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=10433"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}