magic1host.com/blog

A broadband router is a basic device to set up a wired or wireless network. Broadband routers ensure that all the computers on a network can send and receive data to each other and across the Internet. These routers are of both wired and wireless but their features are very similar.

The main need for these types of devices is while transmitting data. These devices have the stuff to transmit data between the distinct networks as data packets. Information is mostly transmitted from one system to other as packets of data. The basic requirement of this type of transmission is that two networks are needed to connect a router. A broadband router has to be used to connect those networks to transmit data between each other. These routers are performed as a gateway for those networks.

Routers enable sharing your broadband internet among computers or laptops in your office or home network. It directs data to travel along the computers on your network and out over the internet to distant computers and to networks located elsewhere.

Routers are first to face any possible outside viruses, hacking threats and so they are vital in a network. But most internet user may not know this, practiced using anti-virus softwares only. A router safeguards your network by working as a filter between the outside internet world and your computers. In general, broadband modems don’t usually have sophisticated built-in security features, so having a network without a router can leave the door open to hackers and other online threatens. Using a router with an in-built firewall makes your wired or wireless network safer and secure, without being vulnerable for internet threats.

Broadband routers can be two types. One is ADSL modem router and the other is a cable routers. ADSL modem routers can only be used for ADSL broadband connections where as cable routers can also be used for cable broadband users. The mode of performance is similar in these two types of routers. The main dissimilarity between these two broadband routers is the mode of connection. ADSL Modem routers can easily be connected just by plug-in to share Internet connection. In case of cable routers, cable sockets and ports have to be used for getting the connection.

Cable broadband users connect to the internet via cable modem that is plugged into the cable socket. Cable routers work by plugging it into the provided cable modem’s in-built networking port. This is also known as Ethernet port or RJ-45 connection and you need this to share your cable internet with in your network. Once connected to the modem, which in turn is connected to the cable socket, the cable router shares the broadband internet with all the computers in your network.